Clamps
Clamps
Adjustable devices designed to securely hold two objects together or to hold an object in place; used with standard-taper and ball-and-socket joints, glass and tubing assemblies, and with ring stands. Available as plastic joint clips, stainless steel pinch clamps, and taper clips.
A laboratory clamp is an essential piece of equipment used to support and secure labware and other laboratory apparatus such as flasks, reaction vessels, tubing, thermometers, probes, columns, funnels, and overhead stirrers.
Some laboratory clamps consist of a shaft and boss head, secured with hand-tightened thumbscrews, knurled nuts, or wingnuts onto a supporting rod, stand or scaffold. They may also include two- or three-pronged, adjustable closing jaws designed for gripping objects safely and securely.
Laboratory clamps are constructed of metals such as stainless steel, nickel-plated zinc, plated brass or diecast aluminum alloy for enhanced chemical, heat, and corrosion resistance. However, some components such as the adjusting screws may be made of plastic, and the prongs may also be lined or covered with cork, plastic, glass-fiber, or rubber for enhanced grip with minimal damage or breakage.
Laboratory Clamp Styles and Designs
• Universal, general-purpose clamps that are fully adjustable for accommodating and securing a wide range of items of different sizes such as columns and thermometers
• Retort clamps for securing round-bottom flasks and similar glassware
• Fork clamps for securing and supporting cone-and-socket ground glassware joints
• Three-prong extension clamps, sometimes available with spring-loaded jaws, for holding irregularly shaped or outsized objects
• Specialized clamps for securing burettes and condensers or reaction vessels
• Chain clamps, which incorporate a circular, adjustable chain loop to hold cylinders and beakers
Fisherbrand™ 3-Prong Utility Clamp
With a screwed shaft and nickel-plated bosshead which can be screwed up and down shaft 35mm and locked in any position with a wing nut.
Bochem™ Aluminum Universal Clamp
Manufactured from aluminum. BOCHEM™ Aluminum Universal Clamp is DIN 12895 certified.
R&L Enterprises™ Retort Stand Clamps
Enables articles from 2 to 90mm in diameter to be clamped securely. R&L Enterprises™ Retort Stand Clamps feature aluminum alloy jaws with other parts of plated brass.
R&L Enterprises™ Beaker Clamp
Securely holds beakers up to 5L. R&L Enterprises™ Beaker Clamps are manufactured from stainless steel and zinc alloy, with glass fibre fabric covered jaws.
Cole-Parmer™ Heavy-Duty Three-Prong Extension Clamps
Securely hold your flasks, beakers and burettes with these extension clamps. Heavy-Duty Three-Prong Extension Clamps feature an innovative closed yoke design that minimizes contamination and corrosion of internal components and is easier to clean and decontaminate.
Cole-Parmer™ Essentials Suspension Clamp, Nickel-Plated Zinc
Provide support for your specific laboratory equipment with this Nickel-Plated Zinc Suspension Clamp.
Cole-Parmer™ Essentials Water Bath Clamp, Three-Prong, Large
Provide support for your specific laboratory equipment with this Large, Three-Prong, Water Bath Clamp.
Cole-Parmer™ Standard 3-Prong Extension Clamp, dual adjustable, medium, nickel-plated zinc
Designed to securely hold a large variety of glassware and apparatus. Cole-Parmer™ Standard 3-Prong Extension Clamps are ideal for irregularly shaped objects.
Cole Parmer Jumbo Holder
Jumbo Holder is ideal for holding clamps or ring stands to lab-frames at a 90° angle. Connectors and holders do not include rods (Order separately).
Cole-Parmer™ Essentials All Position Connector, Adjustable Angle and Plane
Connect rods and/or clamps to your frame or build a custom lab frame with this All Position Connector with Adjustable Angle and Plane.
Cole-Parmer™ Swivel Thermometer Clamp
Cole-Parmer Swivel Thermometer Clamp, Diameter: 6 to 8mm, Nickel-plated Zinc, For Use With: Thermometer, Length: 159.01mm, No. per Pack: 1Each, Size Opening: 6.01mm to 8.128mm
Cole-Parmer Standard 2-Prong Extension Clamp, single adjustment, medium, nickel-plated zinc
Designed to securely hold a large variety of glassware and apparatus. Cole-Parmer™ Standard 2-Prong Extension Clamps are ideal for cylinder type labware.
Fisherbrand™ Bossheads
For securely keeping clamps in place on laboratory scaffolding. R&L Enterprises™ Bossheads come with offset jaws for greater strength.
R&L Enterprises™ Retort Stand Clamps
Enables articles from 2 to 90mm in diameter to be clamped securely. R&L Enterprises™ Retort Stand Clamps feature aluminum alloy jaws with other parts of plated brass.
