accessibility menu, dialog, popup

Test

Heaters and Heating Mantles

Heaters and Heating Mantles

Used as an alternative to hotplates and Bunsen burners, heaters and heating mantles allow for direct contact with glassware without the fear of shattering because the heating element is typically insulated from the container. As a result, heaters and heating mantles can provide round bottom flasks with uniform heat distribution. Fabric heating mantles are foldable, allowing them to be used with numerous flask shapes and sizes, while rigid heating mantles are generally less prone to tearing or spill damage. The temperature for heaters and heating mantles is usually controlled by a rheostat, which makes maintaining temperature simpler.
Heating Tapes Cords and Mats (108)
Stirring Heating Mantles (32)
Heating Elements and Supports (30)
Non-stirring Heating Mantles (26)
Electrical Heating Mantles with Controllers (23)
Column Temperature Control Mantles (10)
Electrical Heating Mantles without Controllers (6)
Immersion Heaters (5)
Infrared Heaters (5)
Heater Controllers (3)
Heating Mantle Controllers (3)

Filtered Search Results

Products from some of our suppliers do not display in filtered search results. Please clear all filters to see these products.

Narrow Results

Narrow Results

No results found within this category. Try removing some selected filters and try again.

category

brands

  • (1)
  • (1)
  • (1)
  • (2)
  • (2)
  • (4)
  • (7)
  • (94)
  • (3)
  • (5)
  • (103)
  • (3)
  • (1)
  • (1)
  • (5)
  • (1)
  • (6)
  • (10)

special programs

  • (1)

Product Type

  • (1)
  • (1)
  • (1)
  • (1)
  • (2)
  • (1)
  • (1)
Show all

Voltage

  • (1)
  • (1)
  • (1)
  • (108)
  • (2)
  • (2)
  • (1)
Show all

Temperature (Metric)

  • (1)
  • (1)
  • (1)
  • (1)
  • (1)
  • (2)
  • (4)
Show all

Capacity (Metric)

  • (1)
  • (1)
  • (1)
  • (11)
  • (2)
  • (2)
  • (14)
Show all

Length (Metric)

  • (2)
  • (1)
  • (3)
  • (2)
  • (8)
  • (1)
  • (1)
Show all

For Use With

  • (1)
  • (1)
  • (1)
  • (1)
  • (1)
  • (4)
  • (2)
Show all

Height (Metric)

  • (1)
  • (2)
  • (2)
  • (3)
  • (1)
  • (1)
  • (1)
Show all

Height (English)

  • (3)
  • (8)
  • (2)
  • (3)
  • (1)
  • (1)
  • (2)
Show all

Depth (Metric)

  • (1)
  • (1)
  • (1)
  • (4)
  • (1)
  • (2)
  • (7)
Show all

Amperage

  • (1)
  • (1)
  • (1)
  • (1)
  • (2)
  • (1)
  • (1)
Show all
1 – 15 of 120 results
1

Cole-Parmer™ HM-200 Series Heating Mantle

The HM-200 Series Heating Mantle with thermal insulating cartridge provides maximum heat transfer.

Promotions are available
Temperature (English) 842°F
Temperature (Metric) 450°C
Voltage 230 V
Frequency 50/60 Hz
Power Supply Details UK and EU plug
Material Polypropylene
Closure Type Polypropylene Outer Case
2

Cole-Parmer™ BB-200 Series Electric Bunsen Burner

BB-200 Series Electric Bunsen Burner provides clean and easy operation.

For Use With (Application) Heating teat tubes, crucibles, beakers
3

Cole-Parmer™ HM-200 Series Flask/Funnel Heating Mantle

The HM-200 Series Flask/Funnel Heating Mantle has an opening in its base that accommodates a wide variety of flasks and 60° funnels.

Promotions are available
For Use With Flasks
Product Type Heating Mantle
Temperature (Metric) 450°C
Voltage 230 V
Frequency 50/60 Hz
Power Supply Details UK and EU plug
Liner Material Stainless steel screen
4

Cole-Parmer™ HM-200 Series Flask/Funnel Heating Mantle with Controller

The HM-200 Series Flask/Funnel Heating Mantle has an opening in its base that accommodates a wide variety of flasks and 60° funnels.

Promotions are available
For Use With Flasks
Product Type Heating Mantle
Temperature (Metric) 450°C
Voltage 230 V
Frequency 50/60 Hz
Power Supply Details UK and EU plug
Liner Material Stainless steel screen
5

Cole-Parmer™ SHM-200 Series Multiposition Extraction Heater/Stirrer

This SHM-200 Series Multiposition Extraction Heater/Stirrer allows liquids with different boiling points to be heated and/or stirred next to each other.

Promotions are available
Includes Three 1/2 in. (12.7 mm) dia. support rods, 6 ft. (1.8 m) power cord.
Design Polypropylene housing
Speed 50 to 1000rpm
Temperature (English) 842°F
Product Type Extraction Heater/Stirrer
Voltage 230 V
Frequency 50/60 Hz
Vessel Type Round bottom flask
Material Polypropylene, Powder Coated Aluminum
Certifications/Compliance CE
For Use With (Application) Stirring and heating solution
6

Cole-Parmer™ HM-200 Series Multiposition Extraction Heater

The HM-200 Series Multiposition Extraction Heater allows liquids with different boiling points to be heated next to each other.

Promotions are available
Voltage 230 V
7

Electrothermal™ Analogue Power Controller

Control the power supply to one piece of laboratory equipment at a time. Analogue Power Controller is designed to control the heating of resistive loads for bench top operation.

8

Cole-Parmer™ SHM-200 Series Stirring/Heating Mantle

The SHM-200 Series Stirring/Heating Mantle provides powerful stirring speeds up to 520 rpm and heating up to 450°C.

Promotions are available
Product Type Stirring Heating Mantle
Certifications/Compliance CE
9

Thermo Scientific™ Reacti-Vap™ Evaporators

Add evaporation to the Thermo Scientific™ Reacti-Therm™ Heating and Stirring module for derivatization or other small scale reactions.

Product Type Evaporator
Temperature (Metric) Ambient +10° to 200°C
10

Cole-Parmer™ SHM-250 Series Digi-Mantle Heating Kit

This SHM-250 Series Digi-Mantle Heating Kit includes a heating mantle controller and interchangeable heating cartridge.

Weight (Metric) Shipping 3.1 kg
Speed 100 to 2000 rpm
Height (Metric) 650 mm
Weight (English) Shipping 6.8 lb.
Dimensions (L x W x H) 300 x 300 x 650 mm
For Use With Round Bottom Flasks
Temperature (English) 842°F
Width (English) 11.8 in.
Length (Metric) 300 mm
Product Type Heating Mantle
Temperature (Metric) 450°C
Width (Metric) 300 mm
Height (English) 25.6 in.
11

Electrothermal™ CMU Series Controlled Mantle

Used in chemistry to heat liquids in round bottom flasks. Electrothermal™ CMU Series Controlled Mantle includes a stainless steel grounded earth screen covering the element and is double-fused for added safety.

Temperature (Metric) 450°C
Voltage 230 V
Frequency 50/60 Hz
12

Electrothermal™ CMUA Series Stirring/Heating Mantles

Magnetic stirrer and heating mantle in one convenient unit

Promotions are available
For Use With Flasks
Product Type Stirring Heating Mantle
Temperature (Metric) 450°C
Voltage 230 V
13

Electrothermal™ Multi Extraction Mantles - 3 Recess Model, Heating Only

Vented case's unique airflow ensures the unit remains cool-to-the-touch

Promotions are available
15

Electrothermal™ CMUV20/CL Heating Mantle

The CMUV Heating Mantles allow the heating of large volumes with the advantages of the CMU heating mantles. With its V-shaped design, Erlenmeyer flasks, bulbous vessels and round-bottom flasks can be used.