Test
A combination pH electrode with PEEK plastic shaft for chemical and mechanical durability, and a fixed cable. Designed for use in a variety of applications.
Diameter (English) | 0.47 in. |
---|---|
Length (Metric) | 120 mm |
pH Range | 0 to 14 |
Diameter (Metric) | 12 mm |
Membrane | U Glass |
Filling Solution Type | Xerolyt Polymer |
Material | PEEK |
Temperature (Metric) Operating | 0°C to 100°C |
Internal Reference | ARGENTHAL |
pH electrodes designed for small sample volumes or for measuring in small containers.
Response Time | <20 sec. |
---|
Designed for measuring in small or narrow neck vessels or test tubes
A combination pH electrode with an integrated temperature sensor and chemically resistant HA glass body. It is designed for general lab applications and ideal for use at high pH values (IP67 rated).
Temperature (Metric) Range | 0°C to 100°C |
---|---|
pH Range | 0 to 14 |
Membrane | HA Glass |
Material | Glass |
Junction | Ceramic |
Temperature (Metric) Operating | 0°C to 100°C |
A durable, plastic body pH electrode ideal for a wide range of applications that is able to withstand wet and demanding environments (IP67 rated).
A pH electrode featuring a special glass body which is resistant to corrosive or organic samples, and is ideal for high temperatures and biological media. The high electrolyte outflow prevents contaminants from entering and clogging the junction, which would interfere with the reading.
Diameter (English) | 0.47 in. |
---|---|
Temperature (Metric) Range | 0°C to 100°C |
Temperature (English) Operating | 32°F to 212°F |
pH Range | 0 to 12 |
Diameter (Metric) | 12 mm |
Membrane | A41 Glass |
Filling Solution Type | 3mol/L KCl |
Material | Glass |
Junction | Moveable Glass Sleeve |
Temperature (Metric) Operating | 0°C to 100°C |
Internal Reference | ARGENTHAL with Ag+ trap |
Use these pH electrodes for portable measurement and routine measurement in the lab. WTW™ SenTix™ 41 pH Electrodes are ideal for applications where reliable measured values are needed under adverse conditions.
Used in conjunction with Jenway™ Conductivity meters - 4510, 4520 and 3540. Jenway™ Glass Bodied Conductivity Probes are designed for general purpose conductivity, pure water, and low conductivity solutions.
Type | Conductivity Cell |
---|---|
Temperature (Metric) Range | 0°C to 100°C |
Length (Metric) Cable | 1 m |
Length (Metric) | 120 mm |
For Use With (Equipment) | 4510, 4210, and 3540 Conductimeters |
Material | Glass Body, Platinum Plate |
Probe | Conductivity |
Diameter (Metric) Body | 12 mm |
Use these pH electrodes for portable measurement and routine measurement in the lab. WTW™ SenTix™ 81 pH Electrodes are ideal for applications where reliable measured values are needed under adverse conditions.
With its easy handling and robust design, these electrode conductivity cells are proven 2 and 4 electrode technology. The four electrode measuring cell TetraCon™ 925 model is for medium and high conductivity.
Recommended for all applications where reliable measured values are needed even under the most adverse conditions. For demanding measurements in the lab, there are SenTix™ electrodes with 3 mol/l KCl liquid electrolyte, easy to clean glass shaft and platinum diaphragm.
Measure general pH samples as well as viscous or colloidal samples with the Thermo Scientific™ Orion™ 8172BNWP ROSS™ Sure-Flow™ pH Electrode.
Standard electrodes with gel and precision electrodes with liquid gel electrolyte for pH measurements in lab applications and in the field.
Fisherbrand™ accumet™ AE series pH electrodes support the accumet™ AE150 pH meter for routine pH measurements at a budget-friendly price.
Fisherbrand™ accumet™ AE series pH electrodes support the accumet AE150 pH meter for routine pH measurements a budget-friendly price